Installing Windows 10 on a PC is generally a straightforward process, but like any software installation, it can have its own set of issues. One common error that you might encounter during the installation process is the message "Windows is unable to install to the selected location" with an accompanying 0x80300001 error.
If you're facing this error while installing Windows 10, don't worry. In this article, we'll provide you with a solution to fix the 0x80300001 Error in Windows 10 during the OS installation.
 |
| How to Resolve Error 0x80300001 During Windows 10 Installation |
What is the Reason Behind the 0x80300001 Error in Windows 10?
If you intend to install a 64-bit version of Windows 10 on a drive other than the C: drive, you may encounter the 0x80300001 error.
For instance, if you currently have Windows 10 installed on your system and want to install a new copy of it on a different drive (such as D: or E:), you may experience this error.
How to Resolve the 0x80300001 Error on Windows 10?
There are several solutions that you can try to fix the 0x80300001 error during Windows 10 installation. Some of these solutions are:
- Use the Diskpart utility to clean the target drive: Open the Command Prompt during the installation process and use the Diskpart command to clean the drive where you want to install Windows 10. This will erase all the data on the drive and make it ready for installation.
- Disconnect all other drives except the target drive: Sometimes, having multiple drives connected to your system can cause installation issues. In this case, disconnect all other drives except the one where you want to install Windows 10.
- Check the target drive's partition style: The target drive's partition style should be either MBR or GPT, depending on your system's firmware type. Make sure the partition style of the target drive is compatible with your system's firmware.
- Change the boot mode to UEFI: If your system supports UEFI, try changing the boot mode to UEFI instead of Legacy BIOS mode. This can sometimes resolve the installation issue.
Disconnecting the SATA Drives
It is advisable to disconnect all SATA drives from your system and keep only the necessary one for installing Windows 10. This is particularly relevant if you have multiple SATA drives attached to the system.
Additionally, it is recommended that you remove all removable USB devices, such as hard disks and pen drives, to prevent installation errors. By doing so, you can prevent any conflicts that may arise during the installation process.
Performing a Windows Installation Using a DVD
This approach offers a straightforward and efficient method for installing Windows 10 without encountering any installation errors. After completing the partition, you should insert the installation DVD into your system and choose the 'Load Driver' option.
If you encounter the message 'Windows cannot be installed on this disk,' you can proceed with the installation process by disregarding the error message. If necessary, you can re-insert the Windows installation DVD and click on the 'Refresh' option. Subsequently, select the 'Advanced Drive Options' and create a new partition to install Windows 10.
Remove All the USB Devices
As previously mentioned, it is essential to eliminate all USB devices that could disrupt the Windows 10 installation process. You must remove both the internal and external SATA drives.
If you have any partitions on your drive, you should format them before proceeding with the installation. After completing the installation process, remove the Windows installation USB and select the refresh option.
Next, re-insert the USB device and select the refresh option again. You can then click on the 'Next' button and proceed with the installation process, ensuring that it proceeds smoothly.
Changing the Boot Order
If users are not using the RAID option, they may encounter issues with a disk that is not set as the booting disk. One common error that they may encounter is the 0x80300001 error, which can occur when trying to install Windows 10 from a CD or DVD that is not set as the booting disk.
To determine if the issue is with the disk, users should access the BIOS and modify the boot order for installation. They need to ensure that the CD or DVD disk is placed at the top of the boot order to install Windows 10 successfully.
Removing Additional Partitions on the Disk
Suppose you have a 500 GB SSD that contains two volume partitions, with a 200 GB partition allocated for the operating system and the remaining ~300 GB partition allocated for storage. To proceed with the Windows installation, you will need to delete the ~300 GB storage partition.
Note that you should back up the data on the storage partition before deleting it since you will lose all the data on that partition during the deletion process.
- After backing up your data, insert the Windows installation media and boot into the Windows installation wizard.
- Once you reach the Partition Selection window, delete both the 200 GB and 300 GB SSD partitions.
- After deleting the partitions, the disk will display approximately 500 GB of unallocated space.
- You can now proceed with the Windows installation process as usual.
After completing the Windows installation, you can create another SSD partition by shrinking the OS volume through Disk Management.
Conclusion
Could you please try the solutions mentioned above to fix the 0x80300001 installation error on Windows 10, and inform us if there are any additional solutions that may not be apparent? Thank you.